Hi [[ session.user.profile.firstName ]]

Challenges Faced by the End Users During the Qualification of Single Use System

Pharmaceutical industry has been increasingly using single use systems (SUS) for bioprocessing and storage of intermediate and final bulk material in addition to primary packaging. Before a SUS could be used in the manufacturing process, it needs to be qualified for use by a pre-determined process. This presentation will discuss a variety of challenges, both internal and external to the industry that the end use faces during the qualification process. Complexity of SUS, varying quality of vendor data, component change management, changing regulatory expectations, analytical data generation, logistical challenges during E&L study execution, analytical challenges, and the potential impact of unexpected E&L study results will be presented.
Recorded Jan 14 2019 94 mins
Your place is confirmed,
we'll send you email reminders
Presented by
Ben Jeyaretnam, E&L Analytics Lead of Sanofi at Swiftwater and Dr Andreas Nixdorf, Team Manager at SGS Group
Presentation preview: Challenges Faced by the End Users During the Qualification of Single Use System
  • Channel
  • Channel profile
  • Understanding the Propensity of Sequence Variants During Cell Line & Culture... Mar 18 2019 3:00 pm UTC 75 mins
    Dr. Lisa Marzilli, Associate Research Fellow and group leader Mass Spectrometry at Pfizer, USA
    Sequence variants (SVs) are protein isoforms that contain one or more unintended amino acid substitutions. They can arise at a single amino acid site due to a genetic (RNA/DNA) mutation or at multiple amino acid locations, potentially due to translational errors, also referred to as misincorporations. The ability to detect SVs in protein biotherapeutics is critical due to their potential impact on structural/functional characteristics, safety and efficacy. Trypsin peptide mapping with liquid chromatography-ultrahigh resolution tandem mass spectrometry (LC-MS/MS) provides the ideal workflow for the detection, identification, and relative quantitation of both genetic and translational SVs. LC-MS/MS complements next-generation sequencing (NGS) of product cDNA and amino acid analysis (AAA) of cell culture medium during clone selection and process optimization in providing sensitive, comprehensive screening to strategically prevent/minimize SVs and ensure high product quality.

    The occurrence of genetic SVs was evaluated using Sanger sequencing and LC/MS. In this work, mAbs with known high and low-level genetic SVs were studied at various cell culture conditions including scale, process and cell age. While scale and process had no significant impact on genetic SV levels, low-level SVs were found to decrease with cell age whereas high level SVs remained constant.

    Multiple cell culture process options and the final process conditions are analyzed via LC-MS/MS prior to lock-down of the manufacturing process. Additionally, the cell culture medium (days in culture) for all small scale, pilot and clinical batches are analyzed by AAA to ascertain amino acid nutrient levels, which provides indirect monitoring of possible misincorporation situations. For mAbs with confirmed misincorporations, AAA and LC-MS/MS-peptide mapping results primarily correlated with amino acid nutrient depletion.
  • Integrity Assurance for SUS: End-User Perspective Mar 14 2019 9:00 am UTC 75 mins
    Charlotte Masy, Project Manager in global support GSK vaccinés and Donald Young, Sr. Product Manager at Thermo Fisher Scienti
    Single Use technologies are more and more used close to final product leading to increase concern related to integrity. In this article we would like to share supportive data affecting integrity. Defect mode analysis has allowed us to build a risk assessment and a strategy on integrity. This strategy is very important for critical applications when single use are used after last sterile filtration or in process no sterile filtration is possible.
    Several case studies supporting our approach will be shared showing the importance of addressing integrity in the context of use and taking all technical aspect into consideration. Finally, we will also present data analyzing the effect of such a strategy on lowering defect occurrence .
  • Managing Biologics Process Analytical Technology in Pfizer Mar 12 2019 3:00 pm UTC 75 mins
    Keith Davis, Principle Scientist at Pfizer
    Coordinating PAT between development and manufacturing organizations is always challenging. When there are multiple development sites and numerous manufacturing sites, this becomes especially challenging. In order to help manage this in an efficient manner, we have established a PAT SME network with representation from the Manufacturing and the Development organizations. I will briefly introduce how this team facilitates PAT activities and attempts to add value to both organizations.
  • Achieving Seamless Scale-Up and Technology Transfer – A Case Study in Single-Use Mar 11 2019 3:00 pm UTC 75 mins
    Ying Wang, Ph.D., Senior Scientist I, Manufacturing Sciences at AbbVie Bioresearch Center
    Title: Achieving Seamless Scale-Up and Technology Transfer – A Case Study in Single-Use Bioreactors

    A systematic scale-up strategy is critical in enabling a rapid and robust technical transfer. For a program involving a CHO cell culture process, a combination of mass-transfer (kLa) studies, computational simulation and scale-down model experiments were used within this newly developed work-flow. Utilizing this approach, scale-up was successfully accelerated (
    Perrine Rouel, Janssen Pharmaceutical Companies of Johnson & Johnson and Tom Jeffery, Sartorius Stedim Biotech
    The biopharmaceutical industry is known for its long time-to-market and for requiring large resources and time investment for product development. The type of activities required at the start of a biopharmaceutical product development focus mainly on designing a suitable process for manufacturing as rapidly as possible material to be tested in pre-clinical and clinical trials. This is followed, upon success in early clinical trials, by a process optimization phase, which aims at increasing yields while reducing costs-of-good. Moving on towards late stage development, the manufacturing process needs to be characterized, meaning that its robustness to produce the desired product quality when operated within certain process ranges needs to be demonstrated. This phase requires large numbers of development batches using elaborate analytical methods and advanced statistics, in order to fully study the relations between the manufacturing process and product quality.
    Janssen Vaccines has transitioned over the last 3 years from early stage process development to full late stage development programs. In this presentation, we present the implications of such a transition, with the case-study of the QbD-based characterization of a perfusion-based PER.C6® cell culture process for Adenovirus vaccine production at Janssen Vaccines.
  • Risk Based Approaches To Use Of Closed Systems In Renovations Of Existing Biopha Mar 5 2019 3:00 pm UTC 90 mins
    Lars Hovmand-Lyster of Novo Nordisk GPO and Ernest Jenness of MilliporeSigma
    Risk Based Approaches To Use Of Closed Systems In Renovations Of Existing Biopharma API Facilities

    Companies often experience regulatory challenges during inspection of aging facilities, requiring them to initiate projects to optimize product protection and updating to current standards for classified areas for biopharma manufacturing. For a long time the company response have been to improve the existing classified areas or maybe even upgrading to a higher grade of classification. However, it may be more appropriate, and improve product protection, to instead implement the use of closed system processes and downgrade room classification during these facility renovation projects. If closed systems are fully utilised, then a CNC space can be used. As well as reducing complexity of operations, this will reduce capital and operating costs.
    This presentation elaborates the work of BPOG members to harmonize the use of closed systems and define risk based tools and approaches to evaluate appropriate room classification across the Biopharmaceutical industry.
  • Lifecycle management of single use technologies Mar 5 2019 1:00 pm UTC 75 mins
    Francis Verhoeye, Director Single Use Technologies, GSK Vaccines
    Single-use technologies (SUTs) are one of the key drivers in the biopharmaceutical industry today and are changing the way we are operating and qualifying our bioprocesses, offering more flexibility and increasing efficiency. However, the extended use of those technologies in commercial operations requires a robust and specific lifecycle management approach. In this context, we have built an improved technical lifecycle management approach involving close partnership with key suppliers, enhanced standardization, early involvement of global manufacturing functions and full compliance with item creation process in order to ensure business continuity and value creation.
  • Challenges in the Development of Continuous Processes for Vaccines Mar 4 2019 4:00 pm UTC 75 mins
    Danny Vellom, Senior Director, Global Technology and Innovation at Sanofi Pasteur Biologics, Inc.
    The development and application of continuous manufacturing processes for vaccines presents both great opportunity as well as significant challenges, both technical and cultural, for the global industry. The key drivers are manufacturing capacity and flexibility, speed to market, and improved quality through the application of Quality-by-Design and Process Analytical Technology (QbD/PAT). Given the diversity of immunogens (toxoids, conjugate and subunit vaccines, live-attenuated and inactivated viruses, VLPs, etc.), and the variety of unique processes currently utilized to produce either single- or multi-component vaccines, it is unlikely that the transition to continuous processing will happen overnight. Additionally, cultural challenges are faced whenever a new mode of operation appears to some as “too different”, especially in a traditionally conservative sector like the developed-world vaccine industry. That said, market forces, global climate change, and Nature’s propensity to fill unoccupied niches with emerging infectious diseases will undoubtedly induce a first round of pioneers to explore this exciting new design space, ultimately leading to a more nimble industry and more and better opportunities for protection for the global population.
  • Real Time Online Chromatography Monitoring of Product Quality Attributes for Bio Feb 28 2019 3:00 pm UTC 75 mins
    Dr. Gang Xue, Scientific Director at Amgen Inc

    The ever diversifying therapeutic modalities drive for modular and flexible bio-manufacturing, which transformed biologics process from traditional Fed-batch to Single Use BioReactor (SUB), then to Continuous Manufacturing (CM). Process Analytics evolve as critical enabling element of the CM process. It allows to move the release testing from the end of process to real time in the process, which not only eliminates weeks of material disposition delay, but also provides the process scientists product quality insight during the run to make process decisions. However, due to the structural complexity of the bio-molecules, spectroscopic sensors or probes nowadays lack the sensitivity and specificity to illustrate the product quality attributes (PQA) such as protein post translational modifications (PTM). We report here for the first time, we leverage a multi-functional automation system to directly take samples from the different stage of bio-process, purify, denature, derivatize and digest the samples before injecting onto the UHPLC and UHPLC/MS systems, one for online intact protein analysis, the other for Multiple Attribute Method (MAM) analysis for critical PTM PQAs. Benefiting from the high resolution chromatography and mass spectrometry, automated real time bio-molecule product quality monitoring is achieved for both SUB and CM process.

    Dr. Gang Xue is a Scientific Director at Amgen Inc. located in Cambridge, MA. With B.S. degree in Chemistry and B.E. in Computer Science from Tsinghua University and Ph.D in Analytical Chemistry from the Iowa State University, Gang is currently leading the Process Analytics group within Amgen Process Development organization. One of his group’s focuses is the cross modality PAT strategy for the biologics and synthetic continous manufacturing with the goal of process control and real time release testing
  • Continuous Manufacturing: Business Case Drivers and Deployment Strategies Feb 26 2019 4:00 pm UTC 75 mins
    Lawrence De Belder, Senior Principal Engineer at Johnson and Johnson and Richard Steiner, Business Development Manager at GEA
    Continuous manufacturing for Oral Solid Dose drug products has the potential to generate benefits in many different areas of the product life cycle. It will help to improve control and understanding, increase development and transfer speed, assure shorter cycle times, and reduce development, transfer and operational cost.

    If we look at the products which have been approved for commercial production, we see differences in technology, approach, and business case drivers. The main interest is coming from larger pharmaceutical companies, but also generic companies and CMO’s start to invest or have intentions to do so.

    Before implementing a continuous manufacturing process, a number of strategic choices have to be made: start off immediately with new products or learn by converting a legacy batch product into a continuous process without the critical deadline of a launch on your path. A clear development and deployment strategy will help to guide for important choices early on.

    This webinar will give an overview of the different elements that can drive the business case of a continuous manufacturing project, and which strategies could be used to deploy this wonderful technology throughout an organization.
  • Effect of Cell Culture Process Change from Fed-batch to Continuous on... Feb 25 2019 4:00 pm UTC 75 mins
    Ru Zang, Associate Director at Mersana Therapeutics and John Bonham Carter, Director of Upstream Sales at Repligen

    Integrated continuous bioprocessing has attracted a growing interest due to its potential to improve agility and flexibility in the manufacture of therapeutic proteins. To convert an existing fed-batch cell culture process to continuous, or perfusion, the major technical hurdles include maintaining steady state cell culture performance and generating product with comparable product quality attributes. In this presentation, we evaluated three molecules including a fusion protein, an aglycosylated monoclonal antibody (mAb), and a glycosylated mAb. Steady state culture at high cell density was achieved for all three molecules, which allows the delivery of products with consistent product quality and adequate productivity. However, as compared to fed-batch processes, product quality and cell specific productivity differences were observed in perfusion cultures. Further studies indicated that it was feasible to modulate product quality in perfusion process by adding process levers in culture medium. It was also feasible to increase cell specific productivity through medium and process optimization. This presentation provides an insight into the product quality and productivity differences between traditional fed-batch and perfusion cell culture processes and potential approaches to addressing these differences.
  • PDA Technical Report on Low Endotoxin Recovery: Implications to the Industry Feb 21 2019 9:00 am UTC 75 mins
    Dr Friedrich von Wintzingerode, Senior Manager, Global Analytical Science & Technology (gASAT) Microbiology, Global QC bei Ro
    Since first reported by Chen and Vinther in 2013, the phenomenon known as low endotoxin recovery (LER) has been broadly observed in certain matrices commonly used for biologic formulations and certain therapeutic proteins. LER is defined as the inability to recover >50% activity over time when endotoxin is added to an undiluted product. LER is a temperature-and time dependent process, which usually does not occur immediately but after several hours to several days. Compendial LAL method qualification (Bacterial Endotoxin Test = BET per USP /EP 2.6.14/JP 4.01) does not include defined hold time conditions, which may explain why LER has not been detected by following compendial BET guidance. Because of the potential impact to patient safety and complex nature of the LER issue, the Parenteral Drug Association (PDA) published a Technical Report (TR) on LER. This TR was authored by subject matter experts from academia, U.S. FDA, biopharmaceutical companies, and reagent suppliers/testing contractors. The PDA Technical Report on Low Endotoxin Recovery provides a science-based and data-driven strategy in dealing with the LER phenomenon. The author of this article, who acted as co-lead of the TR authoring team, provides first hand information that allows companies to develop product specific solutions to the LER problem.
  • Quality-By-Design in Spray Drying Processes - Transfer Lab to Production Feb 19 2019 3:00 pm UTC 75 mins
    Sune Klint Andersen, Janssen Pharmaceutica & Filipe Gaspar, Hovione FarmaCiência
    Spray drying is a continuous and scalable manufacturing process commonly used in the pharmaceutical industry. Due to its scalable and continuous nature it is possible to apply Quality-by-Design (QbD) and Process Analytical Technologies (PAT) early on in the development of a spray drying process.
    Knowledge gained from QbD e.g. Design-of-Experiments (DoE) and PAT increases process understanding and the knowledge can be readily applied when scaling up the process and in production scale application of PAT i.e. especially with respect to the control strategy.
    The Webinar will discuss the application of QbD early in the development and how the obtained knowledge can be used to optimize transfer of the spray drying process to production scale including PAT strategy.
  • Host Cell Protein Characterisation and Mass Spectrometry Strategies Feb 19 2019 8:00 am UTC 75 mins
    Xuezhi Bi, Group Leader (Proteomics) /Senior Scientist, Bioprocessing Technology Institute, A*STAR 
    Adding Mass Spectrometry as part of the host cell protein workflow
    Analytical Strategies in HCP identification and purification process
    Developing Quantitative MS/MS method to determine HCP Levels
  • Using In-Vitro Dissolution to Support Post Approval Changes Global Regulatory Ex Feb 5 2019 3:00 pm UTC 75 mins
    Dr Xin Bu, Principal Scientist, Bristol-Myers Squibb
    Dissolution is one of the critical quality attributes for solid oral dosage forms, typically tablets and capsules. In addition as a quality control (QC) test to release commercial products, dissolution is often used as a comparative test to 1) apply biowaiver for lower strength(s) when multiple strengths of one product with the same or similar formulation are marketed, or 2) support post approval changes. In these cases, in-vitro dissolution test is used in place of in-vivo bioequivalence study to establish equivalency between products of different strengths or pre- and post-change. Guidances provided by major regulatory agencies, the United States Food & Drug Administration (US FDA) and European Medicines Evaluation Agency (EU EMEA) are often followed by many countries around the world. However some countries/ regions, such as Australia, Japan, China, Taiwan and Korea have their own country specific guidances. The dissolution requirements by the FDA and EMEA are generally similar, and depend on the type and level of changes as outlined in the relevant guidances. The requirements from other mentioned countries are often significantly different from that of US and EU, and different from each other. For products marketed globally, it’s prudent to understand the differences amongst the different country requirements when applying post approval changes using dissolution to demonstrate equivalency. Several sets of comparative dissolution studies may have to be conducted in order to satisfy all regulatory agencies. This presentation compares differences in dissolution testing requirements among the listed countries and provide examples to illustrate how for conduct studies to comply with the relevant guidance(s).
  • Raw Material Lot Variability Challenges During Manufacturing of Biosimilars mab Jan 25 2019 10:00 am UTC 75 mins
    Sekhar Reddy, DSP Lead for Biosimilars at Biocon MSAT
    Downstream processing of Biosimilar Monoclonal Antibody utilises variety of raw materials that a critical for achieving the desired product quality. In this webinar, we would like to discuss the data from three cases of lot to lot variability namely Depth filtration, Chromatographic resin and buffer component used in downstream chromatography unit operations. Changes in lots of depth filter resulted in significant clogging and differences in Host cell impurity clearance. Similarly, changes in resin lots resulted in increased back pressure during processing and variability in buffer raw material lots resulted in undesirable colouring of resin upon contact. In each case, we will present the root cause investigation, impact on product quality profile and associated CAPAs to control the effects of variability to ensure manufacturing continuity.
  • Extractables from Single-Use Bioreactors and Impact on Cell Culture Performance Jan 22 2019 3:00 pm UTC 75 mins
    Yasser Nashed-Samuel, Principal Scientist at Amgen Donald Young, Sr. Product Manager at Thermo Fisher Scientific
    Attribute Sciences, Process Development, Amgen Biopharmaceuticals are drugs manufactured bygrowing genetically engineered cells in bioreactors to produce a therapeutic protein. Plastic single-use bioreactors are of interest to biopharmaceutical drug manufacturers due to their significant environmental and cost benefits and flexibility over stainless steel bioreactors. Effect of plastics on the biomanufacturing process is not yet completely understood. A case study on extractables from single-use bioreactors and impact on cell culture performance will be presented.
  • Single Use Manufacturing within the Bristol-Myers Squibb Manufacturing Network Recorded: Jan 17 2019 66 mins
    Lance Marquardt, Bristol-Myers Squibb & Sara Bell, Merck
    By Lance Marquardt, Associate Director – Upstream Processing for Hopewell Clinical Manufacturing at Bristol-Myers Squibb and Sara Bell, Senior Marketing Manager for Mercks’s single-use product portfolio.
    An overview of the current use of single use manufacturing within the Bristol-Myers Squibb manufacturing networks and planned future state. The challenges in implementing single use manufacturing for commercial production will be discussed. Comparisons will be made to the implementation of past improvements and the plans for future improvements, such as continuous processing.
  • Overcoming Downstream Bottlenecks In The Upscaling Process Recorded: Jan 17 2019 35 mins
    Dr. Dakshesh Mehta, Associate Vice President and Head of Bioprocess Group at Biotech & Genomics division
    In recent years, due to major advances in upstream process, therapeutic proteins can be produced at higher concentrations than ever before. For, these high-titer, high-cell density production, chromatography operations may be as perceived bottlenecks. Column size limitations, low dynamic capacity and buffer volume requirements are generally considered as contributing factors, apart from high resin costs.

    The talk will cover how flexible manufacturing systems could help establish efficient downstream processes to overcome capacity bottleneck. Also how downstream footprint can be reduced whilst speeding up purification process. Is there anyway, one could eliminate chromatography operations with other technologies that may require less space and buffers and also may be more cost effective?
  • Challenges Faced by the End Users During the Qualification of Single Use System Recorded: Jan 14 2019 94 mins
    Ben Jeyaretnam, E&L Analytics Lead of Sanofi at Swiftwater and Dr Andreas Nixdorf, Team Manager at SGS Group
    Pharmaceutical industry has been increasingly using single use systems (SUS) for bioprocessing and storage of intermediate and final bulk material in addition to primary packaging. Before a SUS could be used in the manufacturing process, it needs to be qualified for use by a pre-determined process. This presentation will discuss a variety of challenges, both internal and external to the industry that the end use faces during the qualification process. Complexity of SUS, varying quality of vendor data, component change management, changing regulatory expectations, analytical data generation, logistical challenges during E&L study execution, analytical challenges, and the potential impact of unexpected E&L study results will be presented.
The Journal for Asia's Pharmaceutical and Biopharmaceutical Industry
BioPharma Asia aims to keep its 30,000 readers abreast of all developments in the areas of Drug Development, Drug Delivery, Manufacturing, Quality Assurance, Outsourcing and Regulatory Affairs, with only the highest quality articles, written by the most respected authors, associated with only end-user companies. This ensures that the information will always be guaranteed to remain timely, informative and above all totally unbiased.

Embed in website or blog

Successfully added emails: 0
Remove all
  • Title: Challenges Faced by the End Users During the Qualification of Single Use System
  • Live at: Jan 14 2019 2:50 pm
  • Presented by: Ben Jeyaretnam, E&L Analytics Lead of Sanofi at Swiftwater and Dr Andreas Nixdorf, Team Manager at SGS Group
  • From:
Your email has been sent.
or close