Diferencia entre estabilización y optimización – sobre el control de flotación
El tema a tratar será ‘Control y estrategia operativa del proceso de flotación’, en el cual Outotec demostrará la importancia de lograr el máximo control en una planta de flotación.
Algunas de las herramientas básicas y avanzadas que han sido desarrolladas por Outotec serán presentadas a los participantes, así como los pasos para implementar una estrategia de control exitosa – enfatizando la diferencia entre estabilización y optimización de un circuito de flotación. Se invitará a los participantes a discutir los problemas actuales relacionados al control y estrategia operativa con el instructor. La duración de la presentación es de aproximadamente 45 minutos con 15 minutos para preguntas al final.
RecordedAug 19 201658 mins
Your place is confirmed, we'll send you email reminders
Outotec Precious Metals (PM) refining technologies cover the full range of process steps and material-handling streams, starting from diverse high-grade PMs containing materials or concentrates, e.g. copper anode slime, etc. to fine bars and granules of 4N gold and silver. This webinar introduces Outotec technologies of processing copper anode slime to recover and refine PMs as well as other valuable metals.
What is the single most important parameter in successful running of the furnace?
Learn how to improve safety, reduce metal losses to slag, avoid refractory wear and save on operating cost by controlling the temperature of the Flash Furnace in a smart way.
Environmental requirements in industry are tightening globally nowadays. This affects also smelting industry and sets new, tighter demands for electric furnace gas handling systems. Most important requirements for electric furnace gas handling are safety, reliability and environmental requirements. In this webinar we discuss how to respond to renewed gas handling requirements maintaining operational and safety aspects.
- With depleting metal ore reserves and finely dispersed ore bodies, fine grinding has become an integral part of mineral processing circuits. In the past 7 years, Outotec HIG mills have been marketed, tested, sold, and commissioned for several projects worldwide in a wide range of applications and mill sizes, including the world's highest power regrind / fine grinding / stirred mills.
- During this webinar, we will discuss how the HIGmill optimizes grinding efficiency and maximizes operating profitability. We will be sharing example cases on optimizing projects from technical, economic, and environmental points of view.
· With depleting metal ore reserves and finely dispersed ore bodies, fine grinding has become an integral part of mineral processing circuits. In the past 7 years, Outotec HIG mills have been marketed, tested, sold, and commissioned for several projects worldwide in a wide range of applications and mill sizes, including the world's highest power regrind / fine grinding / stirred mills.
· During this webinar we will discuss how the HIGmill optimizes grinding efficiency and maximizes operating profitability. We will be sharing example cases on optimizing projects from technical, economic, and environmental points of view.
This webinar will cover recent developments and ongoing intensification of the Outotec Ausmelt TSL Process for treatment of zinc-containing feeds with the goal of reducing the carbon footprint, CAPEX and OPEX associated with the processing of these materials. The operating philosophy, equipment updates and selected results from demonstration of the proposed process improvements will be covered along with a comparison to other processing routes.
Hear about a robust, easy-to-operate and sustainable technology for treatment of refractory gold concentrates. Plus we discuss latest developments in BIOX, a technology with 30+ years of commercial operation.
1. Refractory gold processing options
2. BIOX process and installed references
3. BIOX developments
- ASTER technology for thiocyanate biodegradation and more effective water balance
- HiTeCC technology for preg-robbing ores
4. What’s next for BIOX?
- MesoTHERM technology - high temperature biooxidation for reduced cyanide consumption
- Surface Aeration Ring – enhancing oxygen mass transfer in biooxidation reactors;
Digitalization has been a topic in most board rooms for many years already and it has slowly transformed from thoughts to actions even in the metals production industry. In this webinar we will discuss how we built our journey towards a fully automated smelter and show examples of intelligent sensors and advanced process control and the value these solutions have been able to generate at operating plants.
Эксперты Outotec: Елена Нечаева и Артуро Гутиерес дель Олмо
На вебинаре мы сделаем обзор технологий по обезвоживанию хвостов и управлению хвостовым хозяйством, подробно рассмотрим внедрение решений в производственный процесс, обсудим технические преимущества различных технологических подходов и поделимся информацией об успешном применении технологий Outotec на производствах в разных странах мира.
Electronic scrap is a rapidly growing type of waste material that is representing an increasing challenge for society to manage. For smelters though, it can represent a valuable feedstock due to its high content of gold and other valuable metals. This webinar looks at the special processing considerations in treating this kind of material due to the physical and chemical differences compared with copper and gold primary concentrates.
Hemos desarrollado un plan de cinco pasos para implementar mejoras que varían las velocidades de rotación, utilizando experimentos de diseño para recopilar datos.
Estos datos se utilizan en un proceso de simulación que a la vez evalua el potencial de cada celda de flotación. Como resultado se obtiene un óptimo rendimiento utilizando la menor cantidad de energía posible.
Outotec is a true technology company with extensive R&D capabilities. The 70 years of smelting R&D has created an unique combination of deep process knowhow and state-of-the-art equipment. Outotec is able of optimize our customers' processes and develop new technologies to provide value for the customer which is demonstrated with case examples.
Kaj Jansson, Head of Industrial Water Treatment Solutions
The topic in focus will be on monitoring and controlling mine site water balance from both external and internal viewpoints. This helps the sites to move towards more water-saving mode, understand what kind and volumes of waters are flowing around in the mine sites and the concentrator plant. With online reporting, visual layout, alarm functions and possibilities to make the offline water connection to test different water scenarios it will give valuable information on the everyone's sites and easies down workloads related to reporting and water simulations.
Ari Rantala, Director – Automation and Digital Solutions
The topic in focus will be on metallurgical digital twins for mineral processing plants and options for exploiting them for improving and optimizing operations efficiency and transparency. Outotec will discuss and present some of the advanced tools that can be smoothly used to develop a metallurgical digital twin, connect it to real plant and how
it can be applied to benefit daily process optimization tasks together with for example advanced process control, reporting and forecasting tasks.
We have developed a five-step plan to implement improvements that vary rotation speeds using design experiments to gather data. This data is used to provide a simulation process to assess the potential of each flotation cell to provide optimal performance using minimal energy.
Outotec webinars for mining, metals and energy professionals.
Outotec is hosting a series of educational webinars focusing on different minerals and metals processing topics. We help our customers create the smartest value from natural resources and work with them to find the most sustainable solutions for water, energy, minerals, and handling the full value chain from ore to metals.
Diferencia entre estabilización y optimización – sobre el control de flotaciónTano Balbin, Market Area Product Manager Automation, Outotec[[ webcastStartDate * 1000 | amDateFormat: 'MMM D YYYY h:mm a' ]]57 mins