Hi [[ session.user.profile.firstName ]]

Practical solutions for mine tailings and water - session 2

Dry stacking successes?
Water efficiency is not the only driver for dry stacking. Several gold producers are implementing dry stacking in Artic environments where the sites are water positive to achieve minimum environmental impact and minimise the risk of tails spills. Climatic conditions change some of the stacking logistics. We look at some of the more recent mine sites to embrace filtered tailings
Combining mine backfill and dry stacking is an attractive option for some sites, how to balance the demands of different systems.
Reliability focus on critical tailings filtration infrastructure, in dry stack operations maintenance can be a labour-intensive operation and good planning is essential to achieve the best availability and keep control of costs
Recorded May 14 2020 55 mins
Your place is confirmed,
we'll send you email reminders
Presented by
Jason Palmer, Director, Surface Tailings & Water Solutions, Outotec
Presentation preview: Practical solutions for mine tailings and water - session 2

Network with like-minded attendees

  • [[ session.user.profile.displayName ]]
    Add a photo
    • [[ session.user.profile.displayName ]]
    • [[ session.user.profile.jobTitle ]]
    • [[ session.user.profile.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(session.user.profile) ]]
  • [[ card.displayName ]]
    • [[ card.displayName ]]
    • [[ card.jobTitle ]]
    • [[ card.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(card) ]]
  • Channel
  • Channel profile
  • Outotec Precious Metals refining technologies Sep 16 2020 7:00 am UTC 60 mins
    Mikhail Maliarik, Richard Lindh
    Outotec Precious Metals (PM) refining technologies cover the full range of process steps and material-handling streams, starting from diverse high-grade PMs containing materials or concentrates, e.g. copper anode slime, etc. to fine bars and granules of 4N gold and silver. This webinar introduces Outotec technologies of processing copper anode slime to recover and refine PMs as well as other valuable metals.​
  • Controlling temperature in the Flash Smelting furnace Sep 9 2020 9:00 am UTC 60 mins
    Elli Miettinen
    What is the single most important parameter in successful running of the furnace?​
    Learn how to improve safety, reduce metal losses to slag, avoid refractory wear and save on operating cost by controlling the temperature of the Flash Furnace in a smart way.​
  • Electric furnace gas cleaning solutions in tightening environmental requirements Sep 2 2020 9:00 am UTC 60 mins
    Niko Räsänen
    Environmental requirements in industry are tightening globally nowadays. This affects also smelting industry and sets new, tighter demands for electric furnace gas handling systems. Most important requirements for electric furnace gas handling are safety, reliability and environmental requirements. In this webinar we discuss how to respond to renewed gas handling requirements maintaining operational and safety aspects.​
  • Liberate your profit with the HIGmill technology for fine / ultra-fine grinding Jul 23 2020 4:00 pm UTC 60 mins
    Riddhika Jain, Product Manager HIGmill; Bjorn Nielsen, Director, Product Management Grinding
    - With depleting metal ore reserves and finely dispersed ore bodies, fine grinding has become an integral part of mineral processing circuits. In the past 7 years, Outotec HIG mills have been marketed, tested, sold, and commissioned for several projects worldwide in a wide range of applications and mill sizes, including the world's highest power regrind / fine grinding / stirred mills.
    - During this webinar, we will discuss how the HIGmill optimizes grinding efficiency and maximizes operating profitability. We will be sharing example cases on optimizing projects from technical, economic, and environmental points of view.
  • Liberate your profit with the HIGmill technology for fine / ultra-fine grinding Jul 22 2020 3:00 am UTC 60 mins
    Riddhika Jain, Product Manager HIGmill; Bjorn Nielsen, Director, Product Management Grinding
    · With depleting metal ore reserves and finely dispersed ore bodies, fine grinding has become an integral part of mineral processing circuits. In the past 7 years, Outotec HIG mills have been marketed, tested, sold, and commissioned for several projects worldwide in a wide range of applications and mill sizes, including the world's highest power regrind / fine grinding / stirred mills.
    · During this webinar we will discuss how the HIGmill optimizes grinding efficiency and maximizes operating profitability. We will be sharing example cases on optimizing projects from technical, economic, and environmental points of view.
  • Ausmelt process intensification: Case Zinc residues Jul 9 2020 7:00 am UTC 60 mins
    David Wilson, Jacob Wood
    This webinar will cover recent developments and ongoing intensification of the Outotec Ausmelt TSL Process for treatment of zinc-containing feeds with the goal of reducing the carbon footprint, CAPEX and OPEX associated with the processing of these materials. The operating philosophy, equipment updates and selected results from demonstration of the proposed process improvements will be covered along with a comparison to other processing routes.​
  • Refractory gold - latest developments in Biological Oxidation (BIOX) technology Recorded: Jun 30 2020 61 mins
    Craig Van Buuren & Alan Dennis
    Hear about a robust, easy-to-operate and sustainable technology for treatment of refractory gold concentrates. Plus we discuss latest developments in BIOX, a technology with 30+ years of commercial operation.
    Topics include
    1. Refractory gold processing options
    2. BIOX process and installed references
    3. BIOX developments
    - ASTER technology for thiocyanate biodegradation and more effective water balance
    - HiTeCC technology for preg-robbing ores
    4. What’s next for BIOX?
    - MesoTHERM technology - high temperature biooxidation for reduced cyanide consumption
    - Surface Aeration Ring – enhancing oxygen mass transfer in biooxidation reactors;
  • Aiming towards fully automated smelting  Recorded: Jun 25 2020 45 mins
    Mikael Jåfs, Joonas Starast, Joey Hoang
    Digitalization has been a topic in most board rooms for many years already and it has slowly transformed from thoughts to actions even in the metals production industry. In this webinar we will discuss how we built our journey towards a fully automated smelter and show examples of intelligent sensors and advanced process control and the value these solutions have been able to generate at operating plants. ​
  • Asset Analytics for Couriers, PSI's and Grinding Recorded: Jun 24 2020 52 mins
    Tano Balbin
    Outotec Asset Analytics delivers critical event-based equipment condition and operating data for your equipment.

    Our Asset Analytics includes comprehensive equipment health and asset monitoring capability with a wide range of diagnostic and analytic reporting tools.

    Identifying potential equipment problems before equipment failure minimizes unplanned downtime and productivity losses.
  • Технологии обезвоживания и управления хвостовым хозяйством Recorded: Jun 23 2020 62 mins
    Эксперты Outotec: Елена Нечаева и Артуро Гутиерес дель Олмо
    На вебинаре мы сделаем обзор технологий по обезвоживанию хвостов и управлению хвостовым хозяйством, подробно рассмотрим внедрение решений в производственный процесс, обсудим технические преимущества различных технологических подходов и поделимся информацией об успешном применении технологий Outotec на производствах в разных странах мира.
  • E-scrap – Turning waste into gold  Recorded: Jun 17 2020 60 mins
    Stephen Hughes, Jan Stål
    Electronic scrap is a rapidly growing type of waste material that is representing an increasing challenge for society to manage. For smelters though, it can represent a valuable feedstock due to its high content of gold and other valuable metals. This webinar looks at the special processing considerations in treating this kind of material due to the physical and chemical differences compared with copper and gold primary concentrates. ​
  • Optimizando la velocidad de rotación para maximizar la fracción de partículas Recorded: Jun 11 2020 53 mins
    Guillermo Bermudez
    Hemos desarrollado un plan de cinco pasos para implementar mejoras que varían las velocidades de rotación, utilizando experimentos de diseño para recopilar datos.
    Estos datos se utilizan en un proceso de simulación que a la vez evalua el potencial de cada celda de flotación. Como resultado se obtiene un óptimo rendimiento utilizando la menor cantidad de energía posible.
  • It all starts from metallurgy: Creating customer value - 70 years of smelting Recorded: Jun 11 2020 54 mins
    Jyrki Makkonen, Mari Lindgren, Robert Matusewicz
    Outotec is a true technology company with extensive R&D capabilities. The 70 years of smelting R&D has created an unique combination of deep process knowhow and state-of-the-art equipment. Outotec is able of optimize our customers' processes and develop new technologies to provide value for the customer which is demonstrated with case examples.​
  • Pretium Water Advisor – Towards sustainable water management Recorded: Jun 11 2020 28 mins
    Kaj Jansson, Head of Industrial Water Treatment Solutions
    The topic in focus will be on monitoring and controlling mine site water balance from both external and internal viewpoints. This helps the sites to move towards more water-saving mode, understand what kind and volumes of waters are flowing around in the mine sites and the concentrator plant. With online reporting, visual layout, alarm functions and possibilities to make the offline water connection to test different water scenarios it will give valuable information on the everyone's sites and easies down workloads related to reporting and water simulations.
  • How to benefit from metallurgical digital twin in process optimization Recorded: Jun 10 2020 59 mins
    Ari Rantala, Director – Automation and Digital Solutions
    The topic in focus will be on metallurgical digital twins for mineral processing plants and options for exploiting them for improving and optimizing operations efficiency and transparency. Outotec will discuss and present some of the advanced tools that can be smoothly used to develop a metallurgical digital twin, connect it to real plant and how
    it can be applied to benefit daily process optimization tasks together with for example advanced process control, reporting and forecasting tasks.
  • Optimizing rotation speeds to maximize targeted particle fraction Recorded: Jun 9 2020 49 mins
    Guillermo Bermudez & Afshin Jalili
    We have developed a five-step plan to implement improvements that vary rotation speeds using design experiments to gather data. This data is used to provide a simulation process to assess the potential of each flotation cell to provide optimal performance using minimal energy.
  • Soluciones para el manejo de concentrados de flotación Recorded: Jun 4 2020 47 mins
    Guillermo Bermudez
    ¿Sabía usted que puede mejorar el rendimiento metalúrgico de su circuito de flotación actual al generar y recolectar más espuma?
  • Key steps to optimise maintenance in your flotation circuit Recorded: Jun 4 2020 61 mins
    Sherwin Morgan
    In most mining operations, achieving and/or exceeding production targets is an important measure of success. Equipment availability and efficiency greatly contributes to these targets, with best performance obtained through routine preventative maintenance. This webinar focuses on flotation, where we share sites with good maintenance practices and associated revenue benefits. We also identify the equipment that requires routine maintenance, plus recommended inspection practices.
  • Solutions to manage concentrate froth Recorded: Jun 2 2020 49 mins
    Guillermo Bermudez
    Optimize flotation cell froth carry rates, lip loading properties, and mass pull stability with our custom-designed froth recovery set-up. The optimal launder and crowder design helps you maximize your flotation cell performance and achieve your grade and recovery targets.
  • Innovations in gold leaching and plant control Recorded: Jun 2 2020 60 mins
    Alan Dennis
    To obtain maximum returns from gold leaching, it is necessary to ensure tight control of a range of factors, including grind size, reagent addition, carbon management, and leaching conditions. The feed mineralogy to the CIL/CIP circuit can change with time, so plant design should be flexible to accommodate the changing mineralogy. We will discuss various technologies and process design options for variable ore feeds to maximise gold recovery, plus benefits such as reduced power and reagents.
Outotec webinars for mining, metals and energy professionals.
Outotec is hosting a series of educational webinars focusing on different minerals and metals processing topics. We help our customers create the smartest value from natural resources and work with them to find the most sustainable solutions for water, energy, minerals, and handling the full value chain from ore to metals.

Embed in website or blog

Successfully added emails: 0
Remove all
  • Title: Practical solutions for mine tailings and water - session 2
  • Live at: May 14 2020 6:00 am
  • Presented by: Jason Palmer, Director, Surface Tailings & Water Solutions, Outotec
  • From:
Your email has been sent.
or close