Minimizing Soluble Gold Losses with Continuous Management of Activated Carbon
To optimize the gold leaching process and minimize soluble gold losses, one should actively manage the amount of activated carbon in the reactors by controlling the carbon pumping. However, one cannot control what one cannot measure, and therefore some means of analyzing the carbon concentration in each tank is needed. The traditional method of manual sampling and laboratory analysis is too slow, prone to significant errors and infrequent to be useful in continuous carbon management. We’ll introduce Outotec’s in-situ carbon concentration measurement – CarbonSense – and discuss control strategies for efficient carbon management.
RecordedMay 28 202061 mins
Your place is confirmed, we'll send you email reminders
What is the single most important parameter in successful running of the furnace?
Learn how to improve safety, reduce metal losses to slag, avoid refractory wear and save on operating cost by controlling the temperature of the Flash Furnace in a smart way.
Metso Outotec Precious Metals (PM) refining technologies cover the full range of process steps and material-handling streams, starting from diverse high-grade PMs containing materials or concentrates, e.g. copper anode slime, etc. to fine bars and granules of 4N gold and silver. This webinar introduces Metso Outotec technologies of processing copper anode slime to recover and refine PMs as well as other valuable metals.
Environmental requirements in industry are tightening globally nowadays. This affects also smelting industry and sets new, tighter demands for electric furnace gas handling systems. Most important requirements for electric furnace gas handling are safety, reliability and environmental requirements. In this webinar we discuss how to respond to renewed gas handling requirements maintaining operational and safety aspects.
This webinar will cover recent developments and ongoing intensification of the Outotec Ausmelt TSL Process for treatment of zinc-containing feeds with the goal of reducing the carbon footprint, CAPEX and OPEX associated with the processing of these materials. The operating philosophy, equipment updates and selected results from demonstration of the proposed process improvements will be covered along with a comparison to other processing routes.
Hear about a robust, easy-to-operate and sustainable technology for treatment of refractory gold concentrates. Plus we discuss latest developments in BIOX, a technology with 30+ years of commercial operation.
1. Refractory gold processing options
2. BIOX process and installed references
3. BIOX developments
- ASTER technology for thiocyanate biodegradation and more effective water balance
- HiTeCC technology for preg-robbing ores
4. What’s next for BIOX?
- MesoTHERM technology - high temperature biooxidation for reduced cyanide consumption
- Surface Aeration Ring – enhancing oxygen mass transfer in biooxidation reactors;
Digitalization has been a topic in most board rooms for many years already and it has slowly transformed from thoughts to actions even in the metals production industry. In this webinar we will discuss how we built our journey towards a fully automated smelter and show examples of intelligent sensors and advanced process control and the value these solutions have been able to generate at operating plants.
Эксперты Outotec: Елена Нечаева и Артуро Гутиерес дель Олмо
На вебинаре мы сделаем обзор технологий по обезвоживанию хвостов и управлению хвостовым хозяйством, подробно рассмотрим внедрение решений в производственный процесс, обсудим технические преимущества различных технологических подходов и поделимся информацией об успешном применении технологий Outotec на производствах в разных странах мира.
Electronic scrap is a rapidly growing type of waste material that is representing an increasing challenge for society to manage. For smelters though, it can represent a valuable feedstock due to its high content of gold and other valuable metals. This webinar looks at the special processing considerations in treating this kind of material due to the physical and chemical differences compared with copper and gold primary concentrates.
Hemos desarrollado un plan de cinco pasos para implementar mejoras que varían las velocidades de rotación, utilizando experimentos de diseño para recopilar datos.
Estos datos se utilizan en un proceso de simulación que a la vez evalua el potencial de cada celda de flotación. Como resultado se obtiene un óptimo rendimiento utilizando la menor cantidad de energía posible.
Outotec is a true technology company with extensive R&D capabilities. The 70 years of smelting R&D has created an unique combination of deep process knowhow and state-of-the-art equipment. Outotec is able of optimize our customers' processes and develop new technologies to provide value for the customer which is demonstrated with case examples.
Kaj Jansson, Head of Industrial Water Treatment Solutions
The topic in focus will be on monitoring and controlling mine site water balance from both external and internal viewpoints. This helps the sites to move towards more water-saving mode, understand what kind and volumes of waters are flowing around in the mine sites and the concentrator plant. With online reporting, visual layout, alarm functions and possibilities to make the offline water connection to test different water scenarios it will give valuable information on the everyone's sites and easies down workloads related to reporting and water simulations.
Ari Rantala, Director – Automation and Digital Solutions
The topic in focus will be on metallurgical digital twins for mineral processing plants and options for exploiting them for improving and optimizing operations efficiency and transparency. Outotec will discuss and present some of the advanced tools that can be smoothly used to develop a metallurgical digital twin, connect it to real plant and how
it can be applied to benefit daily process optimization tasks together with for example advanced process control, reporting and forecasting tasks.
We have developed a five-step plan to implement improvements that vary rotation speeds using design experiments to gather data. This data is used to provide a simulation process to assess the potential of each flotation cell to provide optimal performance using minimal energy.
In most mining operations, achieving and/or exceeding production targets is an important measure of success. Equipment availability and efficiency greatly contributes to these targets, with best performance obtained through routine preventative maintenance. This webinar focuses on flotation, where we share sites with good maintenance practices and associated revenue benefits. We also identify the equipment that requires routine maintenance, plus recommended inspection practices.
Optimize flotation cell froth carry rates, lip loading properties, and mass pull stability with our custom-designed froth recovery set-up. The optimal launder and crowder design helps you maximize your flotation cell performance and achieve your grade and recovery targets.
Outotec webinars for mining, metals and energy professionals.
Outotec is hosting a series of educational webinars focusing on different minerals and metals processing topics. We help our customers create the smartest value from natural resources and work with them to find the most sustainable solutions for water, energy, minerals, and handling the full value chain from ore to metals.