Hi [[ session.user.profile.firstName ]]

Introducing Fibre Channel NVMe

NVMe is one of the most interesting new developments to happen to storage in the past several years, and NVMe over Fabrics extends these capabilities over a Storage Area Network. Given that 80% of all existing Flash storage solutions deployed are interconnected with Fibre Channel (FC), many questions have arisen about what it is, how it works, and why someone might want to consider using Fibre Channel for NVMe-based solutions.

In this technical webinar, we’re going to be addressing some of these fundamental questions:

- How does Fibre Channel and NVMe work together?
- How is NVMe over Fabrics different from “traditional” Fibre Channel?
- What changes do I have to make to my Fibre Channel environment in order to get NVMe over Fabrics to work?
- What would an NVMe over Fibre Channel (FC-NVMe) architecture look like?
- What advantages would I get using Fibre Channel in an NVMe solution?

Check out this live webinar to learn more about this exciting new technology from the people who are developing it.

And after you watch the webcast, check out our Q&A blog http://fibrechannel.org/fibre-channel-101-qa/
Recorded Feb 16 2017 58 mins
Your place is confirmed,
we'll send you email reminders
Presented by
Craig Carlson, FCIA Board of Directors, Cavium, J Metz, FCIA Board of Directors, Cisco
Presentation preview: Introducing Fibre Channel NVMe

Network with like-minded attendees

  • [[ session.user.profile.displayName ]]
    Add a photo
    • [[ session.user.profile.displayName ]]
    • [[ session.user.profile.jobTitle ]]
    • [[ session.user.profile.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(session.user.profile) ]]
  • [[ card.displayName ]]
    • [[ card.displayName ]]
    • [[ card.jobTitle ]]
    • [[ card.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(card) ]]
  • Channel
  • Channel profile
  • Will You Still Love Me When I Turn 64GFC? Dec 11 2018 6:00 pm UTC 75 mins
    Dean Wallace, Marvell; Barry Maskas, HPE
    Fibre Channel’s speed roadmap defines a well-understood technological trend: the need to double the bit rate in the channel without doubling the required bandwidth.

    In order to do this, PAM4 (pulse-amplitude modulation, with four levels of pulse modulation), enters the Fibre Channel physical layer picture. With the use of four signal levels instead of two, and with each signal level corresponding to a two-bit symbol, the standards define 64GFC operation while maintaining backward compatibility with 32GFC and 16GFC.

    This advanced technical session will cover the T11 standards which define 64GFC serial Fibre Channel, backwards speed auto-negotiation compatibility, and compatible form factors:

    •New physical layer and specification challenges for PAM4, which includes eye openings, crosstalk sensitivity, and new test methodologies and parameters
    •Transceivers, their form factors, and how 64GFC maintains backward compatibility with multi-mode fibre cable deployments in the data center, including distance specifications
    •Discussion of protocol changes, and an overview of backward-compatible link speed and forward error correction (FEC) negotiation
    •The FCIA’s Fibre Channel speed roadmap and evolution, and new technologies under consideration
  • How to Expand the Power of Flash Storage with FC-NVMe Nov 1 2018 4:00 pm UTC 60 mins
    Craig Carlson, Rupin Mohan, Dean Wallace, David J. Rodgers, Marcus Thordal, and Dennis Martin
    Flash is really fast, and performance-hungry applications must be able to access it wherever it is located. Luckily, NVMe can take advantage of flash throughout a computer system.

    However, accessing flash over a network can introduce problems which designers must solve. Accesses can take much longer than local flash, latency can rise significantly, networking issues can raise their ugly heads, and performance can vary greatly depending on network load and competition for resources.

    Ways to solve such problems include sequence-level error recovery, prioritization for virtualized environments, and improved forward error correction. And – surprise! – all these are already part of the Fibre Channel standard or the emerging FC-NVMe transport protocol.

    Moderator: Mark Jones, Director Technical Marketing and Performance, Broadcom
    Panelists: Craig Carlson, Senior Technologist, Marvell Semiconductor, Rupin Mohan, Director, R&D, Head of Development, Chief Technologist (SAN), HPE, Dean Wallace, Cavium, David J. Rodgers, Sr. Product Marketing Manager, Teledyne LeCroy PSG, Marcus Thordal, Principal Solution Architect, Broadcom and Dennis Martin, President, Senior Analyst, Principled Technologies.
  • Protocol Analysis for High-Speed Fibre Channel Fabrics Oct 10 2018 5:00 pm UTC 75 mins
    David Rodgers, Teledyne LeCroy; Yamini Shastry, Viavi Solutions; Joe Kimpler, ATTO
    Protocol Analysis for High-Speed Fibre Channel Fabrics in the Data Center: Aka, Saving Your SAN (& Sanity)

    The driving force behind adopting new tools and processes in test and measurement practices is the desire to understand, predict, and mitigate the impact of Sick but not Dead (SBND) conditions in datacenter fabrics. The growth and centralization of mission critical datacenter SAN environments has exposed the fact that many small yet seemingly insignificant problems have the potential of becoming large scale and impactful events, unless properly contained or controlled.

    Root cause analysis requirements now encompass all layers of the fabric architecture, and new storage protocols that usurp the traditional network stack (i.e. FCoE, iWARP, NVMe over Fabrics, etc.) for purposes of expedited data delivery place additional analytical demands on the datacenter manager.
    To be sure, all tools have limitations in their effectiveness and areas of coverage, so a well-constructed “collage” of best practices and effective and efficient analysis tools must be developed. To that end, recognizing and reducing the effect of those limitations is essential.

    This webinar will introduce participants to Protocol Analysis tools and how they may be incorporated into the “best practices” application of SAN problem solving. We will review:
    •The protocol of the Phy
    •Use of “in-line” capture tools
    •Benefits of purposeful error injection for developing and supporting today’s high-speed Fibre Channel storage fabrics

    Join us on October 10, 2018. FCIA experts will be on hand to answer your questions.
  • Fibre Channel Interoperability Recorded: Aug 23 2018 68 mins
    Barry Maskas, HPE; Tim Sheehan, University of New Hampshire Interoperability Lab; David Rodgers, Teledyne LeCroy
    Interoperability is a primary basis for the predictable behavior of a Fibre Channel (FC) SAN. FC interoperability implies standards conformance by definition. Interoperability also implies exchanges between a range of products, or similar products from one or more different suppliers, or even between past and future revisions of the same products. Interoperability may be developed as a special measure between two products, while excluding the rest, and still be standards conformant. When a supplier is forced to adapt its system to a system that is not based on standards, it is not interoperability but rather, only compatibility.

    Every FC hardware and software supplier publishes an interoperability matrix and per product conformance based on having validated conformance, compatibility, and interoperability. There are many dimensions to interoperability, from the physical layer, optics, and cables; to port type and protocol; to server, storage, and switch fabric operating systems versions; standards and feature implementation compatibility; and to use case topologies based on the connectivity protocol (F-port, N-Port, NP-port, E-port, TE-port, D-port).

    In this session we will delve into the many dimensions of FC interoperability, discussing:

    •Standards and conformance
    •Validation of conformance and interoperability
    •FC-NVMe conformance and interoperability
    •Interoperability matrices
    •Multi-generational interoperability
    •Use case examples of interoperability

    After you watch the webcast, check out the FC Interoperability Q&A blog https://fibrechannel.org/a-qa-on-fibre-channel-interoperability/
  • FICON 101 Recorded: Jun 19 2018 62 mins
    Patty Driever, IBM; Howard Johnson, Broadcom; J Metz, Cisco
    FICON (Fibre Channel Connection) is an upper-level protocol supported by mainframe servers and attached enterprise-class storage controllers that utilize Fibre Channel as the underlying transport. Mainframes are built to provide a robust and resilient IT infrastructure, and FICON is a key element of their ability to meet the increasing demands placed on reliable and efficient access to data. What are some of the key objectives and benefits of the FICON protocol? And what are the characteristics that make FICON relevant in today’s data centers for mission-critical workloads?

    Join us in this live FCIA webcast where you’ll learn:

    • Basic mainframe I/O terminology
    • The characteristics of mainframe I/O and FICON architecture
    • Key features and benefits of FICON

    After you watch the webcast, check out the Q&A blog: https://fibrechannel.org/ficon-webcast-qa/
  • Fibre Channel Cabling Recorded: Apr 19 2018 44 mins
    Zach Nason, Data Center Systems, Greg McSorley, Amphenol-Highspeed, Mark Jones, Broadcom
    Looking for more cost-effective ways to implement fibre channel cabling? Learn why proper cabling is important and how it fits into data center designs. Join this webcast to hear FCIA experts discuss:
    - Cable and connector types, cassettes, patch panels and other cabling products
    - Variables in Fiber Optic and Copper Cables: Reflectance, Insertion Loss,
    Crosstalk, Speed/Length Limitations and more
    - Different variations of Structured Cabling in an environment with FC
    - Helpful tips when planning and implementing a cabling infrastructure within a SAN

    After you watch the webcast, check out the Q&A blog: http://bit.ly/2KdtEx0
  • Fibre Channel Performance: Congestion, Slow Drain, and Over-Utilization, Oh My! Recorded: Feb 6 2018 66 mins
    Ed Mazurek, Cisco, Earl Apellanes, Broadcom, David Rogers, Teledyne LeCroy
    Today's Fibre Channel SANs are tasked with reliably delivering huge amounts of data with almost zero latency in an environment with a large variance of end device capabilities. Fibre Channel is a lossless network protocol but what ramifications does that have? What is considered a good SAN design and what are best practices? What situations can lead to suboptimal performance? How can a device that is not performing well affect the performance of devices even on different parts of the SAN? Can a device that is returning credits without delay affect the SAN just like a device that is returning credits slowly?

    Get answers to these questions and more in this live FCIA webcast where you’ll learn:

    •How Fibre Channel achieves a lossless data delivery
    •The definition of "slow drain“
    •Basic slow drain indications and what they mean
    •“Over” Utilization - How a device that isn't "slow drain" by the typical definition can affect a SAN in a similar fashion as a slow drain device
    •How to prevent, Identify, and resolve performance problems

    After you watch the webcast, check-out the the FCIA Q&A blog http://bit.ly/2ouWq4b
  • FCIP (Extension): Data Protection and Business Continuity Recorded: Dec 7 2017 59 mins
    Rupin Mohan, Director R&D, SAN Chief Technologist, HPE, Mark Detrick, Director, Extension Principal Architect, Brocade
    Businesses today rely heavily on their data. Disaster may strike anywhere and occurs in many shapes and sizes. Transporting data over significant distance beyond the reach of a threatening event preserves data so organizations can rapidly recover in the event of a site going down.

    This makes deploying a disaster recovery infrastructure between data centers with fast, continuous, and easy replication of mission-critical data to anywhere in the world essential.
    Fibre Channel over IP (FCIP), often referred to as “Extension,” is used to connect SANs across distance using IP networks. FCIP is commonly used for Remote Data Replication (RDR) between Enterprise Storage Arrays and Remote Tape applications, for the purpose of Business Continuance via Disaster Recovery (BC/DR).

    Join storage technology and industry experts as they discuss their experience and deployment knowledge in:

    •Best known methods for deployment with extension architectures, extension in routed topologies, and performance optimization for remote replication
    •Industry best practices: topologies to achieve high-availability goals, advantages in trunking, encryption, etc…
    •Customer examples and use cases of a variety of critical production environments ranging from SMBs to the largest most demanding enterprises and government institutions

    After you watch the webcast, check out our Q&A blog: http://fibrechannel.org/fcip-extension-questions-and-their-answers/
  • Long-Distance Fibre Channel Recorded: Oct 10 2017 57 mins
    Mark Allen, Storage Networking Senior Manager, Cisco, J Metz, FCIA Board, Cisco
    As people learn more about Fibre Channel and are curious about NVMe over Fibre Channel (FC-NVMe), more questions arise that relate to how storage solutions are going to be affected by the new technology. Perhaps the least understood aspect of storage networks involves distance solutions, and so FCIA has decided to tackle this issue next.

    In this webinar you will learn:

    •How does Fibre Channel work over distances?
    •What are some of the limitations of distance?
    •What happens when you are using FC-NVMe?
    •What special equipment do you need?

    Come spend time with FCIA and speaker Mark Allen, Technical Marketing Engineer Manager for Cisco, to learn how to understand and plan for distance solutions using Fibre Channel.
  • Dive Deep into NVMe over Fibre Channel (FC-NVMe) Recorded: Aug 29 2017 59 mins
    Curt Beckmann, Brocade, Craig Carlson, Cavium, J Metz, Cisco
    As FC-NVMe (NVMe over Fibre Channel) is preparing for it’s official launch, there have been numerous questions about how the technology works, how it gets implemented, and what makes it special when compared to traditional, SCSI-based Fibre Channel.

    When we did our first webinar on FC-NVMe [link], we got lots of questions about more details, more technical aspects, and more thorough explanations. So here we are!

    This presentation is going to be a more thorough analysis of the bits and bytes of FC-NVMe, where you will learn:

    •What are the key differences and similarities between NVMe and SCSI Fibre Channel structures
    •What are the main architectural differences between NVMe and SCSI deployments
    •Impact on Queue Depth
    •How to cross-connect legacy and future flash arrays with FC-NVMe

    Please join us on August 29th for this advanced, deep dive on FC-NVMe.

    Please check out the Q&A blog from this webcast http://bit.ly/2gV4Yxv
  • Fibre Channel Fundamentals Recorded: Jun 15 2017 52 mins
    Rupin Mohan, HPE, Earl Apellanes, Brocade
    Fibre Channel (FC) is the storage networking protocol for enterprise data centers, with over 11 million ports deployed. Fibre Channel is purpose-built –and engineered to meet the demands for enterprise data centers that require rock solid reliability, high performance and scalability. It can even transport new storage protocols like NVMe natively.

    Flexible and resilient, Fibre Channel frames can be encapsulated in both an IP packet (FCIP) as well as a Layer 2 frame (FCoE) and provide unparalleled performance for storage systems. Even so, many people don’t actually understand how it works. This live webcast will help you understand the basics so that you can make informed decisions yourself.

    In this “Foundations” webcast, we’ll answer key questions, such as:
    - What is Fibre Channel?
    - What makes Fibre Channel so reliable?
    - How is Fibre Channel different from other storage protocols?
    - What are the best practices for designing Fibre Channel solutions?
    - And more

    If you’re not familiar with Fibre Channel and want to learn more, or if you are interested in learning about how Fibre Channel is purpose-built for storage and future proofed for next-gen NVMe storage arrays, join us at this live event. Our experts will be available to answer your specific questions on the spot.
  • How to Use the Fibre Channel Speedmap Recorded: Apr 6 2017 41 mins
    Dave Alexander, Tony Bourke
    Fibre Channel is the most well known dedicated storage networking protocol in use in data centers today, and is considered the gold standard for storage in terms of availability, reliability, and scalability. However, it does require some specific design and planning requirements. For that, storage administrators use the Fibre Channel Speedmap in order to plan.

    In this webcast, you will learn how to use the Fibre Channel Speedmap, what the numbers mean, and why its useful:

    - Why do storage administrators use the Speedmap?
    - What’s the difference between throughput, bandwidth, baud rates, and speed?
    - Why does this matter for Fibre Channel and not, say, Ethernet?

    This live webcast will be useful for anyone who wants to separate the wheat from the chaff when it comes to “speeds and feeds,” and make sense of the numbers.
  • Introducing Fibre Channel NVMe Recorded: Feb 16 2017 58 mins
    Craig Carlson, FCIA Board of Directors, Cavium, J Metz, FCIA Board of Directors, Cisco
    NVMe is one of the most interesting new developments to happen to storage in the past several years, and NVMe over Fabrics extends these capabilities over a Storage Area Network. Given that 80% of all existing Flash storage solutions deployed are interconnected with Fibre Channel (FC), many questions have arisen about what it is, how it works, and why someone might want to consider using Fibre Channel for NVMe-based solutions.

    In this technical webinar, we’re going to be addressing some of these fundamental questions:

    - How does Fibre Channel and NVMe work together?
    - How is NVMe over Fabrics different from “traditional” Fibre Channel?
    - What changes do I have to make to my Fibre Channel environment in order to get NVMe over Fabrics to work?
    - What would an NVMe over Fibre Channel (FC-NVMe) architecture look like?
    - What advantages would I get using Fibre Channel in an NVMe solution?

    Check out this live webinar to learn more about this exciting new technology from the people who are developing it.

    And after you watch the webcast, check out our Q&A blog http://fibrechannel.org/fibre-channel-101-qa/
The Technology Voice of the Fibre Channel Industry
The Fibre Channel Industry Association (FCIA) is a non-profit international organization whose sole purpose is to act as the independent technology and marketing voice of the Fibre Channel industry. We are committed to helping member organizations promote and position Fibre Channel, and to providing a focal point for Fibre Channel information, standards advocacy, and education.

FCIA members include manufacturers, system integrators, developers, vendors, industry professionals, and end users. Our member-led working groups and committees focus on creating and championing the Fibre Channel technology roadmaps, targeting applications that include data storage, video, networking, and storage area network (SAN) management.

Embed in website or blog

Successfully added emails: 0
Remove all
  • Title: Introducing Fibre Channel NVMe
  • Live at: Feb 16 2017 7:00 pm
  • Presented by: Craig Carlson, FCIA Board of Directors, Cavium, J Metz, FCIA Board of Directors, Cisco
  • From:
Your email has been sent.
or close