Hi [[ session.user.profile.firstName ]]

Simulating the Future of Aerospace

Ansys simulation solutions deliver the significant product lifecycle cost reductions that the aviation industry demands, while accelerating the technological innovation required for tomorrow’s success.

Join the simulation team at PADT, along with experts from Ansys and AGI (Analytical Graphics, Inc.) for a presentation covering everything you need to stay updated on the role of numerical simulation in the aerospace industry. If you work in the aerospace industry and have considered implementing simulation into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
Recorded Jun 10 2021 56 mins
Your place is confirmed,
we'll send you email reminders
Presented by
Eric Miller, Principle & Co-Owner, PADT, Inc.
Presentation preview: Simulating the Future of Aerospace

Network with like-minded attendees

  • [[ session.user.profile.displayName ]]
    Add a photo
    • [[ session.user.profile.displayName ]]
    • [[ session.user.profile.jobTitle ]]
    • [[ session.user.profile.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(session.user.profile) ]]
  • [[ card.displayName ]]
    • [[ card.displayName ]]
    • [[ card.jobTitle ]]
    • [[ card.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(card) ]]
  • Channel
  • Channel profile
  • Heat Transfer & Flow Updates in Ansys Fluent 2021 R1 Jun 30 2021 6:00 pm UTC 60 mins
    Tom Chadwick, Senior CFD Engineer, PADT
    Ansys Fluent is the industry-leading fluid simulation software known for its advanced physics modeling capabilities and unmatched accuracy. This tool gives you more time to innovate and optimize product performance, allowing users to trust their simulation results with a software that has been extensively validated across a wide range of applications. Two key applications that have seen improvements in the 2021 R1 update are fluid flow and heat transfer.

    Performing steady or transient conjugate heat transfer simulations determines heat exchanger performance and the impact of thermal stresses. Models developed in Ansys Fluent can include fluid structure interaction, fatigue life prediction and multiphase boiling, condensation and evaporation. Additionally, new proprietary high-speed numerics in available in this release enable the reliable solution of high Mach number flows without reducing accuracy.

    Join PADT's Fluent expert Tom Chadwick for a presentation on the latest in fluid flow and heat transfer updates in Ansys 2021 R1.
  • Materials, Composites & Scripting Updates in Ansys Mechanical 2021 R1 Recorded: Jun 16 2021 45 mins
    Doug Oatis, Lead Mechanical Engineer, PADT, Inc.
    Composites provide new solutions for manufacturers looking for stronger, lighter and more cost-effective materials. At the same time, they pose new modeling and manufacturing challenges because of the nature of the materials. With the right simulation tools, designers can account for residual stresses, predict performance, analyze reliability and potential failures, optimize construction, and export accurate information to manufacturing, all before a physical prototype is built.

    Join PADT's Application/Support Engineer and materials Expert Doug Oatis to learn more about updates made to the composites, materials and scripting capabilities in Ansys 2021 R1
  • PADT Advanced Aerospace Conference | Panel Discussion Recorded: Jun 10 2021 62 mins
    Eric Miller, Principle & Co-Owner, PADT, Inc.
    Aerospace has always been one of the most involved industries when it comes to applying advanced engineering technology. Tools such as 3D Printing and Simulation Software have been at the forefront of growing aerospace and transforming it into the innovative industry it is today.

    Join us for a panel discussion moderated by PADT's Principle & Co-owner Eric Miller, featuring conversation with aerospace experts Manoj Mahendran, Global Account Director of Boeing at Ansys, and Jerry Feldmiller, Senior Aerospace Application Engineer at Stratasys. This will focus on what advanced technology such as numerical simulation and additive manufacturing has meant to the industry up until this point, and where it will likely take it in the future.

    If you work in the aerospace industry and have considered implementing advanced technology into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
  • Simulating the Future of Aerospace Recorded: Jun 10 2021 56 mins
    Eric Miller, Principle & Co-Owner, PADT, Inc.
    Ansys simulation solutions deliver the significant product lifecycle cost reductions that the aviation industry demands, while accelerating the technological innovation required for tomorrow’s success.

    Join the simulation team at PADT, along with experts from Ansys and AGI (Analytical Graphics, Inc.) for a presentation covering everything you need to stay updated on the role of numerical simulation in the aerospace industry. If you work in the aerospace industry and have considered implementing simulation into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
  • Additive Advancements in Aerospace Recorded: Jun 10 2021 66 mins
    Pam Waterman, 3D Printing & Support Application Engineer, PADT
    Stratasys has partnered with industry leaders to develop materials and processes that are making 3D printed parts commonplace on aircraft and spacecraft, and cementing the technology as an engineering mainstay.

    Join the additive experts at PADT, along with representatives from Stratasys for a presentation covering everything you need to stay updated on the role of additive manufacturing in the aerospace industry. If you work in the aerospace industry and have considered implementing additive into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
  • LS-DYNA & Motion Updates in Ansys 2021 R1 Recorded: Jun 2 2021 56 mins
    Jim Peters, Senior Staff Technologist, PADT
    Ansys LS-DYNA is the most used explicit simulation program in the world and is capable of simulating the response of materials to short periods of severe loading. Its many elements, contact formulations, material models and other controls can be used to simulate complex models with control over all the details of the problem.

    Ansys Motion is a next-generation engineering solution based on flexible multibody dynamics. It enables fast and accurate analysis of rigid and flexible bodies within a single solver system. Motion can reduce time-to-market by performing system motion performance, stress safety analysis, vibration analysis and fatigue analysis during the design process across many industrial applications.

    Join PADT's Senior Staff Technologist Jim Peters for a discussion on recent advancements made for these two dynamic analysis tools from Ansys in their 2021 R1 release.
  • Signal & Power Integrity Updates in Ansys 2021 R1 Recorded: May 19 2021 37 mins
    Aleksandr Gafarov, Electronics Application Engineer - PADT
    The use of Ansys Electronics solutions minimizes the testing costs, ensures regulatory compliance, improves reliability and drastically reduces your product development time. All this while helping you build the best-in-class and cutting-edge products.

    With signal and power integrity (SI & PI) analysis products, users can mitigate many electrical and thermal issues affecting printed circuit boards such as electromagnetic interference, crosstalk, overheating, etc. Ansys integrated electromagnetics and circuit simulation tools are essential for designing high-speed serial channels, parallel buses, and complete power delivery systems found in modern high-speed electronic devices.

    Leverage the simulation capability from Ansys to solve the most critical aspects of your designs. Join PADT's Electronics expert and application engineer Aleksandr Gafarov for a detailed look at what is new for SI & PI in Ansys 2021 R1, including updates available within the following tools:

    • SIwave - Granta support & differential time domain crosstalk
    • Q3D - Uniform current terminals
    • Circuits - Network data explorer & SPISim
    • HFSS 3D - Parallel meshing, encrypted 3D components & IC workflow improvements
    • Electronics Desktop - Ansys cloud, Minerva & optiSLang integration
    • And much more
  • Electronics Reliability Updates in Ansys 2021 R1 Recorded: May 5 2021 43 mins
    Josh Stout, Application & Support Engineer, Systems, PADT
    Best practices for ensuring and predicting electronics reliability require comprehensive multi-physics simulations. Ansys ensures reliability success by developing solutions and workflows that overcome today’s biggest simulation and design challenges.

    With Ansys 2021 R1, electronics reliability became much easier to manager with advanced capabilities for design democratization, workflow automation, and robust reliability predictions. Along with these updated components, users can better access integrated workflows between Ansys Sherlock, Icepak, Mechanical, LS-Dyna, and more to provide the results necessary to optimize product designs and ensure unparalleled reliability in the field.

    Join PADT's Systems Application & Support Engineer Josh Stout for a presentation covering updates to existing features and the introduction of new tools available in this latest release. Learn how users can:

    • Extract detailed geometries from any ECAD file
    • Predict time to failure before prototyping
    • Perform complex multiphysics analyses
    • Implement automation and optimization
    • And much more
  • Analytical Advancements in Ansys Mechanical 2021 R1 Recorded: Apr 21 2021 41 mins
    Robert McCathren, Application Engineer, PADT, Inc.
    Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought impossible.

    With updates made to Ansys mechanical, users can easily handle the complexity of a variety of design environments. Everything from mulitphysics analysis to dynamic simulation allows for the ability to create a product that meets performance goals and holds up over time.

    Join PADT's Application Engineer Robert McCathren for a look at analytical advancements in Ansys Mechanical 2021 R1, including updates for:

    • Element Technology
    • NonLinear Adaptivity
    • Coupled Physics Analysis
    • Linear Dynamics
    • Contact
    • And much more
  • Thermal Integrity Updates in Ansys 2021 R1 Recorded: Apr 7 2021 35 mins
    Josh Stout, Application & Support Engineer, Systems, PADT
    With CAD-centric (mechanical and electrical CAD) and multiphysics user interfaces, Icepak facilitates the solving of today’s most challenging thermal management problems in electronics products and assemblies. Icepak uses sophisticated CAD healing, simplification and metal fraction algorithms that reduce simulation times, while providing highly accurate solutions that have been validated against real-world products. This tool provides powerful electronic cooling solutions that utilize the industry leading Ansys Fluent computational fluid dynamics solver for thermal and fluid flow analyses of integrated circuits, packages, printed circuit boards, and electronic assemblies.

    With the release Ansys 2021 thermal integrity capabilities saw improvements in a variety of areas. Join PADT's Application & Support Engineer and Thermal Integrity expert Josh Stout to learn more about recent advancements surrounding:

    • Solar Radiation Modeling
    • Robust Meshing Distribution
    • Dynamic Thermal Management
    • The Release of AEDT Mechanical Solutions
    • And Much More
  • Additive & Structural Optimization Updates in Ansys 2021 R1 Recorded: Mar 24 2021 44 mins
    Doug Oatis, Lead Mechanical Engineer, PADT, Inc.
    The most powerful simulation solution for metal additive manufacturing, the Ansys Additive Suite delivers the critical insights required by designers, engineers and analysts to avoid build failure and create parts that accurately conform to design specifications. This comprehensive solution spans the entire workflow — from design for additive manufacturing (DfAM) through validation, print design, process simulation and exploration of materials.

    Ansys 2021 R1 delivers enhancements across all portfolio products — Ansys Additive Prep, Ansys Additive Print, Ansys Additive Science and Ansys Workbench Additive — empowering users to further advance their additive manufacturing capabilities.

    Join PADT's Simulation Support & Application Engineer Doug Oatis for a webinar covering both the structural optimization and additive updates made to Ansys 2021 R1 including enhancements for:

    • Process Simulation

    • Part Qualification

    • Design for AM

    • Build Setup

    • Shape & Lattice Optimization

    • And much more
  • PAAC - Innovating Automotive | Panel Discussion Recorded: Mar 11 2021 58 mins
    Eric Miller, Principle & Co-Owner, PADT, Inc.
    The automotive industry has seen a lot of innovation over the past few years, including everything from alternative fuel and power sources to autonomous vehicles, and advanced engineering technologies such as 3D Printing and Simulation Software have been at the forefront of said innovation.

    Join us for a panel discussion moderated by PADT's Principle & Co-owner Eric Miller, featuring conversation with automotive experts Judy Curran, Head of Global Automotive Strategy at Ansys, and Fadi Abro, Director of Automotive Business at Stratasys.

    This will focus on what advanced technology such as numerical simulation and additive manufacturing has meant to the industry up until this point, and where it will likely take it in the future.
  • PAAC - Simulating the Future of the Automotive Industry Recorded: Mar 11 2021 57 mins
    Judy Curran, Head of Global Automotive Strategy, Ansys & Dr. Arunachala Kannan, Chief Scientist, Zero Electric Vehicles
    Automotive Simulation is more important than ever in vehicle engineering with the innovation surge currently happening in the industry. Smart electronics, infotainment, telecommunications, advanced software – vehicle makers are delivering innovative, groundbreaking technologies to today’s consumers.

    Join the simulation team at PADT, along with experts from Ansys and Zero Electric Vehicles for a presentation covering everything you need to stay updated on the role of numerical simulation in the automotive industry.

    This presentation includes information from Judy Curran, Head of Global Automotive Strategy at Ansys, on industry trends, software tools, and applications for simulation in the automotive industry, followed by a presentation from Dr. Arunachala Kannan, Zero Electric Vehicles' Chief Scientist and Mechanical System Engineer Damon Gonzales, on the company's mission, and how being a startup using Ansys software has and will better prepare them for the future.

    If you work in the automotive industry and have considered implementing simulation into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
  • PAAC - The State of Additive in the Automotive Industry Recorded: Mar 11 2021 49 mins
    Fadi Abro, Director of Automotive Business, Stratasys & Malini Dusey, Additive Manufacturing Application Engineer, GM
    3D Printing Solutions for Automotive take you from design to factory floor quickly and efficiently. Fast track ideas into production, simplify design without limits, and profit from customized small production runs, all while working smarter not harder.

    Join the additive experts at PADT, along with representatives from Stratasys and GM for a presentation covering everything you need to stay updated on the role of additive manufacturing in the automotive industry.

    This presentation includes information from Fadi Abro, Director of Automotive Business at Stratasys, on industry trends, valuable technology, and additive applications for the automotive industry, followed by a presentation from GM Additive Manufacturing Application Engineer Malini Dusey on the company's use of additive and the advantages they have found through using it.

    If you work in the automotive industry and have considered implementing additive into your workflow, or simply want to keep up with what industry leaders are doing, this is the webinar for you.
  • The State of Mechanical Meshing in Ansys 2021 R1 Recorded: Mar 10 2021 36 mins
    Joe Woodward, Senior Mechanical Engineer & Lead Trainer, PADT, Inc.
    Meshing is an integral part of the engineering simulation process where complex geometries are divided into simple elements that can be used as discrete local approximations of the larger domain. The mesh influences the accuracy, convergence and speed of the simulation. Furthermore, since meshing typically consumes a significant portion of the time it takes to get simulation results, the better and more automated the meshing tools, the faster and more accurate the solution.

    Ansys provides general purpose, high-performance, automated, intelligent meshing software which produces the most appropriate mesh for accurate, efficient multiphysics solutions — from easy, automatic meshing to highly crafted mesh.

    Join PADT's Senior Mechanical Engineer and meshing expert Joe Woodward for an introduction to the new meshing capabilities available in Ansys 2021 R1, including updates for:

    • Repairing Topology
    • Weld Control
    • Separating Morphing Adaptive Remeshing Technology (SMART)
    • Batch Connections
    • And much more
  • General Interface & Performance Updates in Ansys Mechanical 2021 R1 Recorded: Mar 2 2021 37 mins
    Ted Harris, Simulation Support Manager, PADT
    Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought to be impossible.

    Ansys Mechanical delivers features to enable faster simulations, easier workflows, journaling, scripting and product integrations that offer more solver capabilities. Within this new release, interface and performance capabilities have been enhanced to offer greater ease of use and overall efficiency in nearly every circumstance.

    Join PADT's Simulation Support Manager and Ansys expert Ted Harris, for an overview of what updates in this release best energize this tool, such as enhancements made to:

    • Solution History
    • Fluid Network Creation
    • Database Management
    • GPU & Solvers
    • And much more
  • High Frequency Updates in Ansys 2021 R1 Recorded: Feb 23 2021 56 mins
    Michael Griesi, Lead Electromagnetics Engineer, PADT
    Whether leveraging improved workflows or leading-edge capabilities with Ansys 2021 R1, teams are tackling design challenges head on, eliminating the need to make costly workflow tradeoffs, developing next-generation innovations with increased speed and significantly enhancing productivity, all in order to deliver high-quality products to market faster than ever.

    When it comes to high frequency electromagnetics, Ansys 2021 R1 delivers a plethora of groundbreaking enhancements. Ansys HFSS Mesh Fusion enables simulation of large, never before possible electromagnetic systems with efficiency and scalability. This release also allows for encrypted 3D components supported in HFSS 3D Layout for PCBs, IC packages and IC designs to enable suppliers to share detailed 3D component designs for creating highly accurate simulations.

    Join PADT's Lead Electromagnetics Engineer and high frequency expert Michael Griesi for a presentation on updates made to the Ansys HF suite in the 2021 R1 release, including advancements for:

    • Electronics Desktop
    • HFSS
    • Circuits
    • EMIT
    • And much more
  • Workflow & Meshing Updates in Ansys Fluent 2021 R1 Recorded: Feb 10 2021 56 mins
    Sina Ghods, Senior Simulation Support & Application Engineer, PADT, Inc.
    From small to mid-sized companies to global organizations, companies of every size seek new ways for pioneering breakthrough innovations that are safer and more reliable to win the race to market. Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought impossible.

    For fluids simulation in this release, products can be designed faster than ever before, thanks to major physics and productivity enhancements that build upon the already powerful workflow and meshing capabilities. Join PADT's Senior Simulation Support & Application Engineer and fluids expert Sina Ghods for a look at what's new in this release including:

    • Fluent User Interface Updates

    • Meshing Workflow Advancements

    • Combustion Applications

    • Turbomachinery Applications

    • Battery Modeling Applications

    • Multiphase and DPM Improvements
  • The Past, Present & Future of Optimizing Topology for Manufacturing Recorded: Jan 22 2021 62 mins
    Eric Miller, Principle & Co-Owner, PADT, Inc.
    Join experts from PADT and nTopology for an interactive roundtable discussion on the ins and outs of topological optimization. This panel will feature topics such as:

    • Applications for topological optimization
    • Additive manufacturing's role
    • Challenges facing users today
    • Advice for new users
    • Where the technology is headed
    • And much more

    Moderated by:

    • Eric Miller, Principle & Co-owner - PADT

    Panelists include:

    • Pam Waterman, 3D Printing & Support Application Engineer - PADT
    • Doug Oatis, Lead Mechanical Engineer, PADT
    • Duann Scott, VP of Marketing - nTopology
    • David Busacker, Senior Engineering Consultant - Stratasys
  • Optimize Additive Topology with FDM Fixture Generator Recorded: Jan 21 2021 48 mins
    Pam Waterman, Application Engineer, 3D Printing Support - PADT
    Additive Manufacturing has profoundly impacted all aspects of manufacturing. With the ability to increase speed-to-market, lower production costs, and customize specialty parts, it continues to fuel innovation.

    Manufacturing jigs, fixtures, and other tooling accounts for more than 20% of all end-use parts produced with 3D printing today. Yet, without tools that make the design of custom jigs and fixtures simpler, many users are kept from reaching the full benefits of Additive Manufacturing on the factory floor.

    One tool that is helping engineers bypass this roadblock is the latest collaborative effort from Stratasys and nTopology, the FDM Fixture Generator.

    This innovative software tool allows you to automate the design of 3D printed jigs & fixtures. Generate custom designs and streamline operations on your factory floor without spending time in CAD. Ready to print with a few clicks.

    Join Sam Kratky from nTopology and Pam Waterman from PADT to learn more about FDM Fixture Generator and how it stands to disrupt the manufacturing environment.
In the business of helping those who make things make them better
We are experienced engineers, sales people, technicians, and administrators who apply knowledge, enthusiasm, and a win-win approach to everything we do. By attending a PADT webinar, you know that you will be receiving nothing but the best possible information, from a certified professional. This channel includes webinars for engineers looking to stay ahead of the curve, focusing on:

- Exploring new relevant topics in the world of
engineering

- Showcasing innovations in Engineering Simulation & 3D
Printing

- Presenting capabilities of ANSYS Simulation Software
and Stratasys 3D Printing

www.padtinc.com

Embed in website or blog

Successfully added emails: 0
Remove all
  • Title: Simulating the Future of Aerospace
  • Live at: Jun 10 2021 8:00 pm
  • Presented by: Eric Miller, Principle & Co-Owner, PADT, Inc.
  • From:
Your email has been sent.
or close