Hi [[ session.user.profile.firstName ]]

Virtual prototyping of superconducting devices

With modern high-temperature superconductor (HTS) materials, and the improved tolerance they exhibit not only toward temperature but field changes, comes renewed endeavour in developing systems that capitalize on their novel properties.

This improved tolerance opens up the use of superconducting materials in AC or transient magnetic systems such as transformers, generators and fault current limiters, in addition to DC systems (e.g. MRI/NMR and particle accelerator magnets) that are already well established.

This webinar will look at methods available to designers of such systems using the Opera Simulation Software Suite, including examples of validation with both analytic descriptions of superconducting materials and physical devices.

There will be a question and answer session at the end of the webinar.
Recorded Jul 23 2014 52 mins
Your place is confirmed,
we'll send you email reminders
Presented by
Jeremy Howard-Knight PhD
Presentation preview: Virtual prototyping of superconducting devices

Network with like-minded attendees

  • [[ session.user.profile.displayName ]]
    Add a photo
    • [[ session.user.profile.displayName ]]
    • [[ session.user.profile.jobTitle ]]
    • [[ session.user.profile.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(session.user.profile) ]]
  • [[ card.displayName ]]
    • [[ card.displayName ]]
    • [[ card.jobTitle ]]
    • [[ card.companyName ]]
    • [[ userProfileTemplateHelper.getLocation(card) ]]
  • Channel
  • Channel profile
  • IOP ebooks - Meet the authors Patrick W Horton and David J Eaton Recorded: Jul 12 2017 33 mins
    Patrick W Horton and David J Eaton
    This webinar is essential viewing for radiation-shielding designers in radiation physics, qualified experts and also useful to anyone involved in the design of radiotherapy facilities.

    Join authors Patrick Horton and David Eaton for this 45 min webinar as they guide you through their book Design and Shielding of Radiotherapy Treatment Facilities-IPEM Report 75.

    There will be a live Q&A session at the end of the webinar.
  • Immuno-PET with Nanobodies Recorded: Jun 22 2017 59 mins
    Dr Hidde Ploegh, Senior Investigator, Boston Children’s Hospital
    The ability to visualize immune responses non-invasively would have tremendous value for basic immunology. In pre-clinical models it would be possible to track events such as the host response to infections, to look at inflammation more generally, and to follow the course of interventions such as checkpoint blocking antibodies in the treatment of tumours.

    PET imaging agents require a workflow compatible with the half-life of commonly used isotopes, and must take into account the pharmacokinetic properties of these agents. The specificity of what is being imaged requires the design of compounds that can distinguish between differences in metabolic activity (18F-fluorodeoxyglucose) or that serve as ligands for specific receptors, such as antibodies that recognize surface structures. We have used nanobodies, the smallest antibody-derived fragments that retain antigen-binding capacity. These fragments are ~15 kDa in size, are rapidly cleared from the circulation and are easily modified by chemo-enzymatic means for the installation of metal chelators or click handles to enable radiolabelling. Using nanobodies, we have been able to image various populations of immune cells, and based on longitudinal immuno-PET observations we have been able to make predictions of success and failure in immunotherapy of the B16 mouse melanoma model. The use of 89Zr-labelled nanobodies for immuno-PET will be a powerful adjunct to more conventional, invasive models, and will provide resolution superior to fluorescence- and luminescence-based models.
  • Photonics Simulation with COMSOL Multiphysics® Recorded: Jun 8 2017 60 mins
    Simone Zonetti, Applications Engineer, COMSOL
    If you are interested in learning about photonics simulation using the COMSOL Multiphysics® software, then tune into this webinar.

    Photonics (the generation, detection, and manipulation of light) plays a fundamental role in modern technology. It is used in a wide range of applications, such as telecommunications, medicine, computing, and manufacturing.

    During this webinar, we will discuss using COMSOL Multiphysics® for photonics simulations, in particular periodic structures and crystals. We will show how modeling can provide insight into the design and characterisation of photonic devices. This includes solving for the propagation of electromagnetic waves, even in the presence of wavelength-dependent material properties, as well as multiphysics effects like heating or mechanical loading.

    The webinar includes a live demonstration and a Q&A session during which you can ask questions.
  • The benefits of gigahertz mode spacing for frequency comb applications Recorded: May 30 2017 61 mins
    Dr Albrecht Bartels, managing director of Laser Quantum
    After the first demonstration of an optical frequency comb based on a mode-locked laser in 1999, Ti:sapphire lasers with repetition rates around 1 GHz were the sources of choice for scientists around the world. Their key feature was a mode spacing 10 times higher than that of comparable 100 MHz sources (simplifying mode identification) and the ability to generate a fully coherent super-continuum with 100 times more power per mode either directly from the cavity or using an external microstructured fibre (enhancing signal-to-noise ratio). The world’s first optical atomic clock was built in 2001 using a 1 GHz Ti:sapphire laser and subsequently it has been shown that these lasers indeed support an accuracy at the 10–20 level with a 1 s stability at the 10–17 level and optical linewidths at the millihertz level, i.e. ideal candidate clockworks for a new generation of optical atomic clocks. The Ti:sapphire technology has even been taken out to as far as 10 GHz, a regime where individual modes with powers in excess of 1 mW can be separated with a grating spectrometer and used individually for direct spectroscopy, spectrograph calibration or optical arbitrary waveform generation.

    To overcome some of the disadvantages of early Ti:sapphire lasers (requirement for frequent alignment, cleaning and use of AO modulators for control purposes) and to make the full advantages of GHz frequency comb technology accessible to the science community, Laser Quantum has developed the hermetically sealed and permanently aligned taccor 1 GHz Ti:sapphire laser featuring an integrated pump laser with direct pump power control. This intervention free laser forms the basis for the new taccor comb system featuring an f-2f interferometer and full comb-stabilization electronics.

    This webinar reviews the benefits of gigahertz Ti:sapphire frequency combs and focuses on the recent progress using Laser Quantum‘s hermetically sealed line of taccor lasers.
  • Studentship opportunities with the UK National Quantum Technology Hubs Recorded: May 25 2017 60 mins
    Professor Kai Bongs, Professor Miles Padgett, Professor Ian Walmsley, Professor Tim Spiller
    The UK Quantum Technology Hubs led by the Universities of Birmingham, Glasgow, Oxford and York are offering fully funded PhD studentships in the areas of sensing and metrology, enhanced imaging, quantum computing and secure communications, Find out more about each hub’s research and their partners, and the studentship opportunities available.

    The UK Quantum Technology Hubs are part of the UK government’s £270 million National Quantum Technologies Programme set up to exploit the potential of quantum science and develop a range of emerging technologies with the potential to benefit the UK.
  • Simulating MEMS and Smart Materials with COMSOL Multiphysics® Recorded: Apr 27 2017 60 mins
    Dr Robbie Balcombe, Technical Director, COMSOL
    If you are interested in modelling smart materials and MEMS using COMSOL Multiphysics®, then tune into this webinar.

    Smart materials are materials whose properties or shape respond dynamically to stimuli in their environment. For example, piezoelectric materials experience strain under an applied electric field, while magnetostrictive materials deform in the presence of a magnetic field.

    In this live webinar, you will learn how to model MEMS sensors and actuators based on smart materials for a wide range of applications, including vibration and active shape control as well as structural health monitoring and energy harvesting. We will also demonstrate the applicability of the COMSOL Multiphysics® simulation environment for coupling mechanical, electrical and thermal models of smart materials.

    At the end of this webinar, you can ask questions during the Q&A session.
  • Basics of PT treatment planning: How does this differ from conventional RT? Recorded: Apr 6 2017 60 mins
    Mark Pankuch, Director of Medical Physics and Dosimetry and Zuofeng Li, DSc. Physics Director, UFHealth Proton Institute
    How to commission and maintain a proton-therapy system.
    Expert physicists explain in detail what it entails.
  • The medical physics revolution continues: the next 60 years Recorded: Mar 22 2017 48 mins
    Robert Jeraj, Professor, Medical Physics, University of Wisconsin
    In the fifth and final of our series of webinars showcasing presentations from the PMB 60th Anniversary Symposium, Robert Jeraj from the University of Wisconsin takes a look at what may lie ahead for medical physics in the next 60 years.
  • Simulating Electromagnetic Communication & Interference with COMSOL Multiphysics Recorded: Feb 28 2017 60 mins
    Dr Simone Zonetti, Applications Engineer, COMSOL
    The physics of electromagnetic coupling through space is fundamental to modern technology. It is exploited in some devices such as RFID tags and directional couplers to communicate information. In other devices, electromagnetic interference (EMI) is an unwanted effect that must be controlled: for example, the problem of crosstalk in electrical circuits and cables. In this webinar we will discuss the simulation of electromagnetic coupling in a variety of different applications, considering examples of capacitive, inductive and radiative couplings in frequencies from the kHz to GHz range. We will show how modelling can provide insight into design, either to improve the quality of a communication device, or to mitigate EMI through effective electromagnetic shielding. A live demo will illustrate how to simulate antenna crosstalk using COMSOL Multiphysics®. We will conclude this webinar with a Q&A session.
  • New horizons for adaptive therapy and dose guidance Recorded: Feb 22 2017 52 mins
    Katia Parodi, Chair of Experimental Physics – Medical Physics, Ludwig-Maximilians-Universität München Germany
    In the fourth of our series of webinars showcasing presentations from the PMB 60th Anniversary Symposium, Katia Parodi examines the key ingredients of modern adaptive radiotherapy, including fast computational models and methods for in-vivo dose/range assessment. She also takes a look forward to the era of biological guidance.
  • Implementing MRI and MR-SIM for Radiation Oncology: What you need to know Recorded: Feb 15 2017 61 mins
    Carri K Glide-Hurst, PhD, DABR Senior Staff Physicist, Henry Ford Health System
    Almost all clinics, small and large, use magnetic resonance images (MRI) in their treatment-planning workflows. Modern treatment planning requires images of high geometric fidelity with high spatial and contrast resolution to delineate disease extent and proximity to adjacent organs at risk. However, imaging protocols needed for accurate treatment planning differ significantly from those used in diagnostic radiology. As the integration of MRI into radiation oncology is expanding rapidly, a need exists to highlight the considerations for safe and effective implementation. This webinar will describe the major differences from diagnostic MRI, provide an overview of MRI safety and training models, introduce clinical-workflow considerations, and describe the development of a robust quality-assurance programme. Special considerations for motion management and treatment planning will be described.
  • Photonic, plasmonic, and multiphysics simulations using CST STUDIO SUITE Recorded: Jan 19 2017 60 mins
    Dr Frank H Scharf, Principal Engineer CST of America
    Optical devices are key components in many areas, such as communications, remote sensing and medical applications, and their role will increase in the future. Simulations are already a very efficient way of optimizing a device, even before the prototype stage. However, simulating optical devices needs distinct consideration due to the special material models, such as graphene, or simply due to the size of the device in relation to the wavelengths of interest.

    CST STUDIO SUITE® offers a unique platform for handling such challenges. The user may import or build even highly complex structures using a user-friendly, interactive GUI. The photonic/plasmonic behaviour of the device can then be simulated by selecting the most appropriate algorithm (e.g. FIT/FDTD, FEM, BEM/MoM, MLFMM and more). Dispersive, anisotropic and nonlinear materials are supported. High-performance computing (HPC) options, such as MPI or GPU, are available, and the results can be displayed and analysed in the GUI using a comprehensive post-processing library and state-of-the-art visualization engine.

    In addition, CST STUDIO SUITE® includes multiphysics solvers linked to EM, allowing users to, for example, simulate the effect of thermal tuning.

    This webinar will demonstrate how CST STUDIO SUITE can be used to analyse a number of essential optical devices, such as silicon-on-insulator (SOI) waveguide components, photonic crystals (PC), plasmonic devices and optical gratings.
  • Exploring flatlands: characterizing 2D materials with atomic force microscopy Recorded: Dec 13 2016 60 mins
    Prof. Andras Kis, EPFL, STI-IEL-LANES and Keith Jones, Oxford Instruments Asylum Research
    The atomic force microscope (AFM) has played an essential role in 2D materials research since it was used to confirm the first isolation of graphene. Today’s AFMs are even more powerful, with higher spatial resolution, faster imaging rates, greater environmental control and enhanced modes for mapping physical properties. They can image crystal lattice structure as well as nanoscale morphology, and sense local electrical, mechanical and functional response in more ways than ever before.

    In this webinar we explore the latest AFM tools that enable higher resolution, sensitivity and more quantitative results for analysing 2D materials. We’ll present results from measurements of a variety of 2D materials for device manufacturing, energy storage and optoelectronics including:
    • MoS2 and graphene;
    • measurements of mechanical properties;
    • kelvin probe imaging (KPFM) of operating transistors;
    • electromechanical measurements.

    We specifically detail AFM modes including:
    • conductive AFM;
    • KPFM;
    • piezoresponse imaging;
    • scanning microwave impedance imaging (sMIM).

    Finally, we discuss how AFM can now be used to accurately determine the thickness of single or multiple layers of a 2D material. This will challenge the misconception that AFM cannot be used to precisely measure the thickness of 2D materials.
  • From vision to sight: "See what you treat" Recorded: Dec 13 2016 48 mins
    Bas Raaymakers Professor of experimental clinical physics UMC Utrecht, The Netherlands
    In the third of our webinars showcasing presentations from the PMB 60th Anniversary Symposium, Bas Raaymakers examines the use of image guidance during radiation therapy. He will describe the various options available for radiotherapy guidance, including in-room CT-on-rails, MV imaging, fluoroscopy, ultrasound, tracking of implanted beacons and cone-beam CT. In particular, he will discuss the use of MRI for real-time visualization of the tumour and its surroundings during treatment.
  • Efficient ODE Set-up and Results Processing for Particle Trajectory Simulation Recorded: Dec 6 2016 60 mins
    Dr. Doug Craigen: Team Leader, Testing and Benchmarking, Integrated Engineering Software
    This webinar addresses practical computational issues in discrete calculations of the path of charged or multipole particles in electric and magnetic fields.

    We begin by showing the theory and an Excel macro implementation of some standard ODE time-based solvers as applied to the charged-particle case. We also discuss potential benefits of a nonstandard distance-based solver configuration.

    Next some examples are provided to illustrate trade-offs between the number of calculations and the accuracy of the result according to various criteria. For example, depending on one’s needs, the simulation set-up might produce output that is either a dense set of (x, y, z) points that plot as a smooth curve, or a much sparser set of points that are individually more accurate than the dense set.

    The webinar will end by examining what can be done with the data obtained. Calculations based on a linear interpolation between points are straightforward, but may force one to use an inefficient ODE set-up. This can take excessive computation resources, hence a longer time than necessary to produce accurate results. Some alternatives will be demonstrated using various degrees of physical insight to get the most information possible from the given ODE output data.
  • Celebrating 30 years of AFM and STM Recorded: Nov 17 2016 60 mins
    Franz Giessibl, Mervyn Miles, Sergei Kalinin, Igor Sokolov and Malgorzata Kopycinska-Müller
    To celebrate the 30th anniversary of the Nobel prize in scanning tunnelling microscopy (STM) and the 30th anniversary since the first paper in atomic force microscopy (AFM), Nanotechnology™ has been organising a focus collection with guest editors Franz Giessibl, Rodolfo Miranda and Johannes Barthes to collate some of the latest cutting-edge progress developing and exploiting these scanning probe techniques.

    In this webinar, we invite one of the guest editors of the collection, members of our editorial board and authors of contributions in the collection itself to join our panel to look at some of the highlights in STM and AFM over the past 30 years and some of the most exciting research developments in the field today.
  • Correlative 3D Raman Imaging: Advancing Semiconductors & Energy Storage Devices Recorded: Nov 15 2016 59 mins
    Dr Thomas Dieing: Director Applications and Support
    This webinar aims to highlight the benefits of correlative Raman imaging for the analysis of chemical composition, crystallinity, stress and optoelectronic properties of materials such as semiconductors, 2D materials and electrodes. Used in combination with either atomic force microscopy or scanning electron microscopy, Raman correlative microscopy provides deep insight into the relation between molecular and structural features of materials – even in 3D.
    The principles of state-of-the-art confocal Raman imaging will first be introduced, then its power as an ideal tool for investigating the chemical and molecular characteristics of a sample will be demonstrated with examples of 2D materials, semiconductors and battery electrodes. The webinar will describe clearly the advantages and ease- of- use offered by Raman imaging systems integrated with other microscopy technologies.
  • Generate, filter, select: How Plan Explorer redefines automatic planning Recorded: Nov 9 2016 52 mins
    Freddie Cardel: Director of Service RaySearch Americas, Erik Korevaar and Roel Kierkels: University Medical Center Groningen
    How automatic is your automation?

    In part one of this webinar, Freddie Cardel outlines the concept of automatic plan generation with Plan Explorer and demonstrates a completely new level of automation. He explains the approach, where large numbers of high-quality treatment plans are automatically generated for defined clinical goals and combinations of treatment techniques and machines, and shows how these plans can be easily filtered and browsed to find the most suitable candidates to be evaluated.

    In part two, Erik Korevaar and Roel Kierkels present the first findings of the clinical evaluation they performed at University Medical Center Groningen, the Netherlands, and describe how the center envisions the use of the tool in clinical practice.
  • Diagnostic Imaging Evolution: discoveries in contrast mechanisms and resolution Recorded: Nov 3 2016 41 mins
    Brian Pogue, Professor of Physics & Astronomy, Dartmouth College Hanover, NH, USA
    Continuing our series of webinars showcasing presentations from the PMB 60th Anniversary Symposium, Brian Pogue discusses the evolution of diagnostic imaging over the last 60 years. He will present examples of successful medical imaging technologies, explain how the use of contrast agents can improve delineation and function assessment, and present some fundamentally new physical imaging systems.
  • IOP ebooks - meet the authors Sam Illingworth and Grant Allen Recorded: Nov 2 2016 45 mins
    Sam Illingworth and Grant Allen
    If you're publishing scientific work, applying for grants, or just want to better convey your research to a wider audience you need to join us for this special webinar with authors Sam Illingworth and Grant Allen on their book Effective Science Communication: A practical guide to surviving as a scientist.

    Sam and Grant will talk us through the research behind their book, why they feel there is a need for this, and provide advice on not only how to survive, but to prosper in the process.

    There will be a live Q&A session at the end of the webinar.
Webinar series
Delivering the latest news, views and information for the global physics community.

Embed in website or blog

Successfully added emails: 0
Remove all
  • Title: Virtual prototyping of superconducting devices
  • Live at: Jul 23 2014 2:00 pm
  • Presented by: Jeremy Howard-Knight PhD
  • From:
Your email has been sent.
or close